F52912 fault in siemens sinamics V90 drive

F52912 fault in siemens sinamics V90 drive indicates a Negative torque limitation value error. This means the parameter setting for negative torque limit was incorrectly set to a value greater than zero. 

Cause:
One of negative torque limitation values (P29051) becomes greater than 0.

Remedy:
  • Configure all of negative torque limitation values (P29051) not greater than 0.

Comments

Post a Comment

Popular posts from this blog

Allen Bradley Kinetix 5500 Drive Fault Codes List

Complete guide to Allen Bradley Kinetix 5500 fault codes. Troubleshoot FLT codes, Single-Cable (DSL) feedback errors, shared bus faults, and perform diagnostics via Studio 5000. Kinetix 5500 Fault Codes Reference Table Kinetix 5500 Fault Codes Reference Table Kinetix 5500 Fault Codes Reference Table Fault Code and Meaning Cause and Remedy FLT S03 – MTR OVERSPEED FL Motor Overspeed Factory Limit Fault Cause: Motor speed has exceeded 125% of its maximum speed. Remedy: Check control loop tuning. FLT S04 – MTR OVERSPEED UL Motor Overspeed User Limit Fault Cause: Motor speed has exceeded motor overspeed user limit. Remedy: Check control loop tuning. Increase the Motor Overspeed UL attribute value. FLT S05 – MTR OVERTEMP FL Motor Overtemperature Factory Limit Fault Cause: Calculations based ...
Read more

Danfoss VACON 100 FLOW Drive Fault Codes List

Access the complete reference guide for Danfoss VACON 100 FLOW drive fault codes. Learn to diagnose Multipump communication errors, dry run faults, and use Vacon Live software. VACON 100 FLOW Fault Codes Reference Table VACON 100 FLOW Faults and Alarms VACON 100 FLOW - Fault Tracing Fault Code and Meaning Cause and Remedy Fault Code 1, ID 1 Overcurrent (Hardware Fault) Cause: There is too high a current (> 4 × IH) in the motor cable. a sudden heavy load increase a short circuit in the motor cables the motor is not the correct type the parameter settings are not properly made Remedy: Check the loading. Check the motor. Check the cables and connections. Make an identification run. Set the acceleration time longer (P3.4.1.2 and P3.4.2.2). Fault Code 1, ID 2 Overcurrent (Software Fault...
Read more

ABB ACH580 Drive Fault Codes List

Access the complete reference guide for ABB ACH580 HVAC drive fault codes. Learn to diagnose issues via the Hand-Off-Auto panel, BACnet integration, and Fireman’s Override. The ABB ACH580 is the industry-standard flagship drive for HVACR applications. Designed to control air handling units, cooling towers, and chillers, it ensures critical comfort and safety in buildings. When a malfunction occurs, the dedicated Hand-Off-Auto (HOA) control panel displays a 4-digit code alongside plain-text diagnostics, often integrated directly into the Building Management System (BMS). This guide provides the most updated reference to help you interpret these codes and maintain building environmental standards. ACH580 Fault Codes Reference Table Use the search bar below or browse the table to identify your specific error code: ABB ACH580 Drive Fault Codes List ABB ACH580 Drive Fault Codes List Fault Code and Meaning Cause and Remedy A2B1...
Read more